Fall 2019 • Spin Off 43
Assembly
1
With the box sitting on one short end, mark the
placement of the swivels on the other short end:
there should be one hole for each spindle, located far
enough apart that the spindles will not touch each other
or the box. Then, using a Swiss Army knife or other
tool, poke holes that are large enough for the swivels to
pass through.
2
Using a small piece of yarn, tie the swivels to the
stick (Figure 1), spacing them as far apart as the
holes in the box. Tie tightly to avoid a gap between the
stick and the swivel.
Sundry Swivels
There are various types of fi shing swivels
available. You want to fi nd swivels that spin
easily and freely and have an eye large enough to
fi t your spindle hooks. I have tried several types
and brands, and they have all performed well.
One of the many joys of spindles is their portabil-
ity; I always fi nd room for spindles when I trav-
el. I keep several swivels in my travel notions
bag and have always been able to easily source
the rest of the supplies. Often a cardboard box is
available if you inquire at a store or hotel.
Types of fi shing swivels.
From left: scrap yarn, chopsticks, and fi shing swivels.
Ph
oto
by
M
att^
Gra
ves
Ph
oto
by
M
att^
Gra
ves
You will need
- Shoebox or cardboard box
that, sitting on end, is taller
than your spindles and wide
enough for them to stand side
by side. - Pen or marker.
- Tool to poke holes into your
cardboard box, such as a Swiss
Army knife with reamer/awl,
scissors, or knitting needle. - A stick or two. (I have used
twigs, chopsticks, coffee stir
sticks, knitting needles, and
popsicle sticks.) - About a yard of yarn.
- One fi shing swivel for each
spindle. (The swivel eye
should be large enough for
your spindle hook.) - Tap e s tr y ne e dle.
Figure 1