21 | New Gates radiator hoses
came from rockauto.com. The upper
radiator hose was a perfect fit, but we
had to trim the lower hose to fit. We
also noticed that the new lower hose
wouldn’t fit over the water pump outlet.
Our fix involved dipping the end of the
hose in hot water, which allowed the
rubber to stretch just enough to fit the
outlet.
22 | The Frostbite FB403 relay kit had plenty of
wire, giving us lots of options for mounting the relay.
We chose to mount it near the radiator, where the
original voltage regulator was located. The light
orange wire connects to a 12-volt source, while the
gray wire goes to the sending unit, and the red wire
connects to the fan harnesses.
23 | Finally, we attach the large yellow wire to
the provided fused power wire seen here. Using
terminals from the kit, we piece together the wiring
and attach it to the positive battery cable. The only
thing left is to connect the ground wires from the
fan harness to the chassis.
24 | Once all of our hoses are secured and the
connections are crimped, we can pour a mixture of
coolant into the new radiator. We ran a short piece
of 5/16-inch rubber hose to a Mr. Gasket overflow
tank, but a stock tank will also work with the new
radiator.
SCAN QR CODE
TO DOWNLOAD!
NEW CPP
CATALOG!
NOW AVAILABLE:
Prices subject to change without notice. * Please note that kits and prices may vary between certain applications.
CHEVY • TRUCK • TRI-FIVE • NOVA • CAMARO • CHEVELLE
- EL CAMINO • MONTE CARLO • MALIBU CLASSIC PARTS!
PROMOCODE:CHP19
LIMITED
TIME ONLY!
ON CPP PRODUCTS ONLY*YOUR TOTAL ORDER,
55
%%
OOFFFF
*
PUTS^ OUT
UP^ TO
1800 PSI
AT THE^ WHEEL!
- Corvette-Style
Tall Spindles - 13" Front Drilled/Slotted Rotors
- Large Dual-Piston Loaded
Black or Red Calipers - Modern Corvette-Style
Hubs & Sealed Bearings - Brake Lines & Hardware
- Works with stock or CPP Totally Tubular™ Control Arms
C5 HUBS WITH
TALL SPINDLES SHOWN
AVAILABLE FOR
MOST POPULAR
CHEVY APPLICATIONS
HYDRAULIC ASSIST SYSTEMS
WHEEL BRAKE KITS
ALSO AVAILABLE WITH
HIGH PERFORMANCE
C7 HUBS
$ 269 /pr starting at $ 849 /kit
AVAILABLE WITH
C5 OE HUBS
starting at $ 649 /kit
FEATURES:
CORVETTE-STYLE
SPINDLE WHEEL
BRAKE KITS
starting
at
CORVETTE-STYLE
SPINDLES ONLY
SYSTEMS INCLUDE RUBBER HOSE KIT!
BOLT-IN INSTALLATION MAKES
UPGRADING TO MANUAL OR
VACUUM-ASSISTED BRAKES EASY!
NO^ VACUUM?
NO^ PROBLEM?
SYSTEMS
starting at $ 829 /kit
100% NEWBARE UNITS
Includes all mounting brackets
& hardware only.starting at $ 469 /ea
FEATURES:
FOR POPULAR APPLICATIONS
100 %^ NEWN^ ODT ERES-BIGUILNT!^
USA
- Boost Up to 80% More Brake
Clamping Force Over Standard
Power Boosters! - Compact-Modern Powerful,
High-Quality, Direct Bolt-In Unit
Puts Out an Amazing 1800 PSI
of System Vacuum — Ideal
for Engines Producing Low
Vacuum or Large
Cam Applications
STREET BEAST™
SYSTEM
SHOWN
REAR KITstarting at $ 569 /kit
Specially designed
conical springs; 350, 450 or
550 spring rates available & all
mounting hardware.
Specially designed,
USA made mounting
brackets.
Includes
springs &
hardware.
FRONT KIT
BOTH KITS INCLUDE
WRENCH & SPANNER
BEARING KIT!
REAR KIT
FRONT KIT
starting at $ 449 /kit
BOLT-IN
INSTALLATION
FEATURES:
COMBINED KITSHOWN
- OE-Style Stamped
Coil Spring Pockets - Patented D-Spec
Performance Bushings - Billet Interlocking Cross-Shafts
- Reinforced Sway Bar &
Shock Mounts - Bump Stops • Ball Joints
- Gloss Black Powdercoated Finish
1963-72
CHEVY TRUCK SHOWN
HELI-ARC^
WELDED
FOR
MAXIMUM^
STRENGTH!
TUBULAR CONTROL ARMS
COIL-OVER KITS
FOR 1963-87 CHEVY TRUCKS, 1955-64 CHEVY FULLSIZE,
1968-74 NOVA, 1967-69 & 1970-81 CAMARO, 1964-72 CHEVELLE,
1964-72 EL CAMINO & 1978-87 G-BODY APPLICATIONS
FOR MOST POPULAR APPLICATIONS
FOR ALL A-BODY & C10 TRUCKS
LOWER CONTROL
ARMS starting at $ 445 /pr
UPPER CONTROL
ARMS starting at $ 327 /pr
LOWER ARMS
ASSEMBLED
WITH^ BALL
JOINTS
UPPER ARMS
UPGRADE YOUR
SUSPENSION
WHEN YOU
COMBINE WITH
COIL-OVER
CONVERSION KITS
USA
USA