Estimating in Building Construction

(Kalthiya AryanmXZGQq) #1

160 CHAPTER THIRTEEN


5.Additional studs are also required on the gable ends of
the building (Figure 13.33), which will have to be
framed with studs between the double top plate and
the rafter unless trusses are used (Section 13–10). The
specifications and elevations should be checked to
determine whether the gable end is plain or has a
louver.
Estimating the studs for each gable end is accomplished
by first drawing a sketch of the gable end and by noting its
size (Figure 13.34). Find the number of studs required by
dividing the length by the stud spacing. Then, from the
sketch find the approximate average height of the stud
required and record the information on the workup sheet.
Multiply the quantity by two since there are two gable ends
on this building (Figure 13.35).


EXAMPLE 13-15 GABLE END STUDS


Average height 2 > 3  3 ¿ 2 ¿

Average height 2 > 3 h

18 spaces — Use 19 studs

Spaces 24 ¿ gable end length0.75 spaces per foot


FIGURE 13.33.Gable End Frame.

FIGURE 13.34.Gable End Sketch.

FIGURE 13.35.Gable Average Height.

Quantity must be doubled to compensate for the gable ends at both
ends of the building. Each 10stud will produce an average of five
studs for the gable ends.

Purchase Quantity

Size Length (lf ) Pieces

2 410 8


Headers. Headers are required to support the weight
of the building over the openings. A check of the specifi-
cations and drawings must be made to determine whether
the headers required are solid wood, headers and cripples,
or plywood headers (Figure 13.36). For ease of construc-
tion, many carpenters and home builders feel that a solid
header provides best results and they use 2 12s as head-
ers throughout the project, even in nonload-bearing
walls. Shortages and higher costs of materials have
increased the usage of plywood and smaller size headers.
When using 2 materials for the headers, 2 4 walls

Studs 19  2 > 5 8 studs
Free download pdf