74 Quilts & More | SUMMER 2020
From each fused navy print and white
print, cut:
■ 1—12×15" rectangle
■ 1—8×12" rectangle
■ 1—2×12" rectangle
ASSEMBLE HANDLE
Measurements include^1 ∕ 4 " seam allowances.
Sew with right sides together unless otherwise
stated.
1 ) Layer navy print 2×12" rectangle and
white print 2×12" rectangle. Sew along one
long edge (Diagram 1). Press seam open
to make handle unit. The unit should be
31 ∕ 2 ×12" including seam allowances.
2 ) Fold handle unit in half lengthwise with
wrong sides together; finger-press seam and
unfold. Fold long edges to meet at center
seam (Diagram 2); fold in half again and
press. Topstitch^1 ∕ 8 " from each long edge to
make handle. The handle should be^7 ∕ 8 ×12".
ADD ZIPPER
1 ) Place navy print 12×15" rectangle right side
up on a flat surface. With zipper closed,
center zipper right side down along 12"-
wide top edge; pin in place (Diagram 3).
The zipper will extend past edges of
rectangle.
pretty topstitching
Designer Jessica VanDenburgh recommends using a stitch-
in-the-ditch sewing machine foot when topstitching. The foot
features a guide for stitching a hair’s width from a seam when
quilting stitch-in-the-ditch designs. By moving her needle
to the far-left position, Jessica uses the guide to make sure
the^1 ∕ 8 " topstitching stays straight and even. She also likes
to lengthen her stitch for a cleaner look.
TIP
12 ×15"
DIAGRAM 3
2 ×12"
DIAGRAM 1
DIAGRAM 2
Pack Your Bags.indd 74 FINAL 3/11/20 4:27 PM