Bailey Catalog

CYLINDERS

104 BAILEYHYDRAULICS.COM | 1-800-800-1810 | [email protected]

HYDRAULIC VALVES

SELECTOR VALVES

Prince™ Two-position Selector Valves (SS Series)

Manual 3-way, 2-position single selector valves allow one pump

source to supply two circuits. Max: 20 GPM, 2500 PSI.

Prince™ Selector Valves (RD900 Series)

This manual 3-way, 2-position selector valve allows one

pump source to supply two separate circuits. Pushing

the handle in diverts oil flow to port away from handle.

Pulling the handle out diverts oil flow to port nearest

handle. Max: 30 GPM, 3,000 PSI.

CHIEF™ Two-position Selector Valves (SV Series)

Designed to direct the flow of oil in a hydraulic system into two sepa-

rate hydraulic lines. Permits the control of two single-acting cylinders

with one three-way control valve. The valve spool is the open-cross-

Part over spool type. Valve should be shifted before pressure is applied.

No.

Prince No. Port Size Handle MSRP 15% OFF

223004 SS-2A1E 1/2’’ NPT Lever $116.00 $98.60

222999 SS-2A1D 1/2’’ NPT Knob $99.00 $84.15

222440 SS-3A1E SAE 8 Lever $122.00 $103.70

223005 SS-3A1D SAE 8 Knob $101.00 $85.85

223006 SS-4A1D SAE 10 Knob $101.00 $85.85

Part

No.

Max

GPM

PSI Port

Size

Handle MSRP 15% OFF

220936 20 3000 SAE 8 Knob $87.00 $73.95

220937 30 3000 SAE 12 Knob $118.00 $100.30

Part

No.

Prince

No.

Port Size MSRP 15% OFF

222420 RD-950 1/2’’ NPT $139.00 $118.15

222421 RD-975 3/4’’ NPT $139.00 $118.15

Parker™ Two-position Double Selector Valves

Designed to direct the flow of oil in a hydraulic system to two

separate circuits. Permits operation of two double-acting

cylinders with one four-way control valve or four single-acting

cylinders with two three-way control valves.

Part

No.

MFG.

No.

Max

GPM

Max

PSI

Port Size MSRP 15% OFF

280160 DS-75 25 2000 3/4’’ NPT $249.00 $211.65

280162 DS-12 25 3000 SAE 12 $249.00 $211.65

Concentric™ Rotary Flow Dividers (Relief Setting 750 PSI)

This flow divider is designed to synchronize the operation of multiple cylinders or hydraulic motors, to provide proportional division of a single pump

output to several circuits, to intensify flow pressure when higher pressure than pump capacity is required, or to combine flows from two sources to

provide a single greater flow to a hydraulic cylinder or motor. All feature differential pressure relief valves on each section and high-pressure seals.

Part

No.

No. of

Sections

C.I.D. Inlet

PSI

Outlet

PSI

Max

RPM

Flow Range

Per Section

Inlet

Port

Outlet

Port

MSRP 15% OFF

250972 2 0.129 3000 3500 4500 1.2-2.5 GPM SAE 8 SAE 8 $435.00 $369.75

250973 2 0.258 3000 3500 4500 2.5-5 GPM SAE 8 SAE 8 $435.00 $369.75

250974 2 0.388 3000 3500 4500 3.5-7 GPM SAE 10 SAE 10 $435.00 $369.75

250975 2 0.517 3000 3500 4500 4.5-9 GPM SAE 10 SAE 10 $478.00 $406.30

250976 4 0.129 3000 3500 4500 1.2-2.5 GPM SAE 8 SAE 8 $743.00 $631.55

250977 4 0.258 3000 3500 4500 2.5-5 GPM SAE 10 SAE 6 $743.00 $631.55

250979 4 0.813 3000 4500 4500 7-14 GPM SAE 16 SAE 12 $1,791.00 $1,522.35