Another view of the convertible top pulled away from the side rail
to remove the top moldings. The end of the convertible top cable is
again visible.Staples were removed from a tacking strip and the part was reused.
If the tacking strips are in poor condition, they should be replaced.The bottom of the rear curtain, which holds the back glass, was
photographed so it could be reassembled correctly.This trim stick fastened the material that makes up the convertible
top, rear curtain, rear pads, headliner and top well (the area
behind the rear seat into which the top folds) to the rear of the
body. When this “keystone” piece was removed, its orientation and
the location of other top components that attach to it were marked.