X2CrMnNii17-7-5
X12CrMnNii18-9-5
X3CrNiCu19-9-2
XKrNiCS 18-9-2X3CrNiCu18-94
X3CrNiCuMol7-11-3-2
XlNiCrMdu31-27-4
X 1 NiCrMoCu25-20-5XlCrNiMoCuN25-25-5
XlCrNiMduN20- 18-7*
XlNiCrMduN25-20-71.4371
1.4373
1.45601.45701.4567
1.4578
1 A563
1.45391.4537
1.4547*
1.4529- co.030
50.15 - (0.035
50.0850.04- (0.04
50.020
50.020
50.020
50.020- (0.020
51.00
51.00- (1.00
51.0011.00- (1.00
50.70
50.70
50.70
50.70
50.506.00 to
8.00
7.50 to
10.50
150 to
2.00- (2.00
52.00- <1.00
52.00 - c2.00
52.00- (1.00
- c1.00
max.
0.045
0.045
0.0450.0450.045
0.045
0.030
0.0300.030
0.030
0.03050.015
50.015
50.0150.15 to
0.35
50.015')
50.015
50.0 10- <0.010
50.010
50.010
50.0100.15 to
0.20
0.05 to
0.25
50.01 150.01 150.01 1
50.01 1
50.01 110.15
0.17 to
02.5
0.18 to
0.25
0.15 to
0.2516.00 to
17.00
17.00 to
19.00
18.00 to
19.00
17.00 to
19.00
17.00 to
19.00
16.50 to
17.50
26.00 to
28.00
19.00 to
21.00
24.00 to
26.00
1950 to
20.50
19.00 to
21.001.50 to
2.00
1.40 to
1.80
3.00 to
4.00
3.00 to
3.50
0.70 to
1.50
1-20 to
2.00
1.00 to
2.00
0.50 to
1 .00
050 to
15050.602.00 to
250
3.00 to
4.00
4.00 to
5.00
4.70 to
5.70
6.00 to
7.00
6.00 to
7.00350 to
5.50
4.00 to
6.00
8.00 to
9.00
8.00 to
10.00
850 to
10.50
10.00 to
11.00
30.00 to
32.00
24.00 to
26.00
24.00 to
27.00
17.50 to
18.50
24.00 to
26.00')Elements not quoted in this table may not be intentiody added to the stcel without the agreement of the purchaser except for finishing the cast ~ll appropriate
precautions are to be taken to avoid the addition of such elements from scrap and 0th~ materials used in production which would impair mechanical p@es and
the suitabiity of the steel.
z)For bars, rods, sections and the relevant semi-hished products, a maximum content of 0.030% S applies. For any product to be machined, a conmU& sulphur
content of 0.015% to 0.030% is recommended and permitted-
3)Where for special reasons, e.g. hot workability for the fabrication of seamless tubes where it is necessary to minimize the delta ferrite content, or with the aim of
low pemeabiity, the maximum Ni content may be increased by the following amounts:
0.50% (m/m): 1.4571
1.0046 (m/m): 1.4306, 1.4406, 1.4429. 1.4434, 1.4436, 1.4438, 1.4541, 1.4550
150% (m/m): 1.4404,
*Patented steel grade.