THE CURE FOR ALL CANCERS
resonate. Use #2 to hear when you have returned to your stan-
dard state.
Method: Place SALT #2 on the substance plate and SALT
#1 on the tissue plate.
- Turn the Syncrometer and speaker ON.
- Start with both the substance and tissue switches OFF.
- Make your first probe (F-C-B-C#).
- Immediately flip the substance switch ON and repeat the
probe. Use only one half second to operate the switch.
This is why these switches are mounted “upside down”,
because it is faster to move the toggle down. The result
should be a NO (negative). If the second probe sounds
even a little higher you are not at the standard level. Wait
a few more seconds and go back to step 2. - If the first result was NO, you may immediately flip the
tissue switch ON. (Again do this within one half second.)
This time the circuit was resonating. Learn to hear the dif-
ference between the last two probes. - The skin must now be rested When SALT #1 is placed in
the circuit there is always resonance whether you hear it
or not. Therefore, always take the time to rest the skin. - How can you be sure that the skin is rested enough? Any
time you want to know whether you have returned to the
standard level, you may simply test yourself to SALT #2
(just do steps 2, 3 and 4). While you are learning, let your
piano also help you to learn the standard level (starts ex-
actly at F). If you do not rest and you resonate the circuit
before returning to the standard level, the results will be-
come aberrant and useless. The briefer you keep the reso-
nant probe, the faster you return to the standard level.
Don't exceed one half second when probing SALT #1.
Hopefully you will soon hear resonance within that time. - This lesson teaches you to first listen to the empty plate,
then to SALT #2, then to SALT #1. In later lessons you