THE CURE FOR ALL DISEASES
The other handhold is attached to the other bolt. Connect
the scope ground wire to one end of the resistor. Connect
the scope probe to the other end of the resistor. Turn the
zapper ON and grasp the handholds. Read the voltage on
the scope. It will read about 3.5 volts. Calculate current by
dividing voltage by resistance. 3.5 volts divided by 1 KΩ
is 3.5 ma (milliamperes).
Using The Zapper.......................................................................
- Wrap handholds in one layer of wet paper towel before
using. Grasp securely and turn the switch on to zap. - Zap for 7 minutes, let go of the handholds, turn off the
zapper, and rest for 20 minutes. Then 7 minutes on, 20
minutes rest, and a final 7 minutes on.
Trying the zapper on an illness to see “if it works” is not
useful. Your symptoms may be due to a non-parasite. Or you may
reinfect within hours of zapping. The best way to test your device
is to find a few invaders that you currently have (see Lesson
Twelve, page 492 , or Lesson Twenty Seven, page 509 ). This
gives you a starting point. Then zap yourself. After the triple
zapping, none of these invaders should be present.
Simple Pulser.............................................................
If you are ill or want a reliable zapping, make the first model.
However, there is another way to make a zapper if you can not
afford to build the first model.
An ordinary battery is a source of positive voltage. It is the
positive voltage that eliminates so many parasites at once, not a
specific frequency. So although the zapper's frequency is about
30 kHz (thirty thousand “zaps” per second), even 5 Hz (five