can also    work    along   with    the traditional wired   networking  to  continue    using
existing    equipment.
A   wireless    network is  still   generally   slower  than    a   traditional wired   network.
However,    this    situation   is  changing    with    wider   adoption    of  newer   protocols.
Network Cable
Currently,  three   types   of  network cable   are available:  coaxial,    UTP,    and fiber.
Coaxial cable   looks   a   lot like    the coaxial cable   used    to  connect your    television
to  the cable   jack    or  antenna.    UTP looks   a   lot like    the cable   that    runs    from    your
phone   to  the wall    jack    (though the jacks   are a   bit wider). Fiber   cable   looks
sort    of  like    the RCA cables  used    on  a   stereo  or  like    the cable   used    on
electrical  appliances  in  a   home    (with   two separate    segments    connected
together).  The following   sections    discuss UTP and fiber   network cable   in
more    detail.
Unshielded Twisted Pair
UTP uses    color-coded pairs   of  thin    copper  wire    to  transmit    data.   Each    of  the
six categories  of  UTP serves  a   different   purpose:
Category    1   (Cat1)—Used for voice   transmissions   such    as  phone.  Only
one pair    is  used    per line:   one wire    to  transmit    and one to  receive.    An  RJ-
11  plug    is  used    to  connect the cable   from    the phone   to  the wall.
Category    2   (Cat2)—Used in  early   Token   Ring    networks.   Has a
transmission    rate    of  4Mbps   and has the slowest data    transfer    rate.   An  RJ-
11  plug    is  used    for cable   connections.
Category    3   (Cat3)—Used for 10BASE-T    networks.   It  has a   transmission
rate    of  10Mbps. Three   pairs   of  cables  are used    to  send    and receive
signals.    RJ-11   or  RJ-45   plugs   can be  used    for Cat3    cables, usually
deferring   to  the smaller RJ-11.  RJ-45   plugs   are similar in  design  to  RJ-11
but are larger  to  handle  up  to  four    pairs   of  wire    and are used    more
commonly    on  Cat5    cables.
Category    4   (Cat4)—Used in  modern  Token   Ring    networks.   It  has a
transmission    rate    of  16Mbps  and is  becoming    less    and less    common  as
companies   are switching   to  better  alternatives.   RJ-45   plugs   are used    for
cable   connections.
Category    5   (Cat5)—The  fastest of  the UTP categories, with    a
transmission    rate    up  to  1000Mbps.   It  is  used    in  both    100BASE-T   and
1000BASE-T  networks    and uses    four    pairs   of  wire.   Cat5    cable   came    out