2007-2008 Turf Catalog

Central Controls

Central Control

• Battery-programmable faceplate allows for programming prior to
  installation.


• When controller is integrated into a central control system, feature
  set changes to that listed on page 162.
  Note: Requires a CCU to connect to Maxicom^2.


• Available in 2 enclosures:
  
  
  • Powder-coated wall mount steel cabinet
  
  
  • Stainless steel pedestal
  
  
  
  

Operating Specifications

• Station timing: A, B, C, D: 0 to 2 hours in 1-minute increments;
  2 to 12 hours in 10-minute increments


• Automatic starts: 32 starts total, eight per program per day


• Programming schedule: 1. ODD day watering per program;
  2. EVEN day watering per program 3. CYCLICAL (1 to 99 days,
  variable per program; 4. Custom day-of-the-week by program


• Test program: Variable 1 to 99 minutes

Electrical Specifications

• Input required: 117 VAC ± 10%, 60Hz
  (International models: 230 VAC± 10%, 50Hz)


• Output 26.5 VAC, 2.5A


• Station load capacity: Up to two 24 VAC, 7VA solenoid valves per
  station plus a master valve or pump start relay


• Diagnostic circuit breaker skips and indicates stations with
  overloaded circuits


• Non-volatile, 100-year memory holds program, date, and time during
  power outages.


• Battery backup: 9VDC, NiCad rechargeable for programming under
  battery power and for maintaining active program-in-progress
  during a power outage


• Heavy-duty electrical surge protection


• Single-point ground bus bar

Dimensions

• Wall Mount Metal
  Width: 11^5 ⁄ 16 " (28,7 cm)
  Height. 11^1 ⁄ 2 " (29,2 cm)
  Depth: 6^1 ⁄ 2 " (16,5 cm)


• SS Pedestal
  Width: 11^1 ⁄ 2 " (29,2 cm)
  Height. 30" (76,2 cm)
  Depth: 11^1 ⁄ 2 " (29,2 cm)

Models

Two-wire Communication CCU or TWI to Satellite

• ESP-12SAT-2W: 12 stations, wall mount


• ESP-16SAT-2W: 16 stations, wall mount


• ESP-24SAT-2W: 24 stations, wall mount


• ESP-28SAT-2W: 28 stations, wall mount


• ESP-32SAT-2W: 32 stations, wall mount


• ESP-36SAT-2W: 36 stations, wall mount


• ESP-40SAT-2W: 40 stations, wall mount


• ESP-12SAT-2S: 12 stations, stainless steel pedestal


• ESP-16SAT-2S: 16 stations, stainless steel pedestal


• ESP-24SAT-2S: 24 stations, stainless steel pedestal


• ESP-28SAT-2S: 28 stations, stainless steel pedestal


• ESP-32SAT-2S: 32 stations, stainless steel pedestal


• ESP-36SAT-2S: 36 stations, stainless steel pedestal


• ESP-40SAT-2S: 40 stations, stainless steel pedestal

Link Radio Communication CCU or TWI to Satellite

• ESP-12SAT-LW: 12 stations, wall mount


• ESP-16SAT-LW: 16 stations, wall mount


• ESP-24SAT-LW: 24 stations, wall mount


• ESP-28SAT-LW: 28 stations, wall mount


• ESP-32SAT-LW: 32 stations, wall mount


• ESP-36SAT-LW: 36 stations, wall mount


• ESP-40SAT-LW: 40 stations, wall mount


• ESP-12SAT-LS: 12 stations, stainless steel pedestal


• ESP-16SAT-LS: 16 stations, stainless steel pedestal


• ESP-24SAT-LS: 24 stations, stainless steel pedestal


• ESP-28SAT-LS: 28 stations, stainless steel pedestal


• ESP-32SAT-LS: 32 stations, stainless steel pedestal


• ESP-36SAT-LS: 36 stations, stainless steel pedestal


• ESP-40SAT-LS: 40 stations, stainless steel pedestal
  Note: All models also available in 50Hz
  Note: If LINK communication is to be used between the CCU and the
  satellites, a Radio/Modem kit must also be specified.
  Note: ESP-SAT field satellite controllers require a CCU to connect to the
  Maxicom^2 system.
  Note: Two-wire path is a hardwire communication path connecting the
  ESP-SAT to the CCU.
  Note: Link Radio is wireless radio communication connecting the
  ESP-SAT to a CCU.
  Note: 12, 16 & 24 station models occupy 1 channel on CCU. 28, 32, 36 & 40
  station models occupy 2 channels on CCU.
  Note: Link Radio communication satellites have 2 sensor inputs.