Microsoft Word - Woodshop 101 Part 1 of 3

through it and into the deck. In order for the gun turrets to turn the hole
going through it needs to be larger than the screw you’re using so it just
slips through. Take the turret back off and with a larger bit drill a bigger
hole. Place a flat washer underneath the gun turret and place another
washer onto the screw up to the head. Make sure that the washer’s hole
is smaller than the head of the screw. With the screw and washer in
place slide them through the gun turret and through the washer on the
other side and finally screw it into the deck of the ship. Tighten it down
just until its snug.