Microsoft Word - Woodshop 101 Part 1 of 3

(vip2019) #1

Step 7
With your brace drill and a 3/8” twist bit, drill a hole about 3/8” deep 1”
below the bottom of the entrance hole. Cut off about 2” of a 3/8” dowel,
spread some glue on the end, and with your hammer lightly tap it into
the hole.


Step 8
Since we built our birdhouse out of pine, which will not hold up outside
very long, we need to protect it with some finish. You can paint yours or
use a clear finish like a marine varnish. Either one will work fine.

Free download pdf