untitled

Mounting everything on the dish .....................................................

Time to assemble the handle that allows you to hold the parabolic micro-

phone. Figure 6-10 shows how the pieces (minus the parabolic dish itself)

go together. When these fittings are assembled on the parabolic dish, the

threads go through the hole in the center of the dish with one gasket inside

the dish and one gasket outside the dish.

R3

from C 5

to ground

C5 from Pin 5

of IC 1

to open region

C1 from

microphone TB

to R2 TB

C3 from Pin 7

of IC 1

to ground

R1 from C 1

to +V

C4 from Pin 5 of IC 1

to headphone jack TB

C2 from Pin 1 of IC 1

to Pin 8 of IC 1

Figure 6-9:

Insert

resistors

and

capacitors

on the

breadboard.

126 Part II: Sounding Off!