untitled

10. Cut the wires from the phono jacks, potentiometer, on/off switch, bat-
    tery pack, and DB9 connector to a length that allows you to arrange
    wires neatly in the enclosure.


11. Strip insulation from the ends of cut the wires, insert them in the ter-
    minal blocks, and secure with wire clips, as shown in Figure 7-15.

The components shown in this figure, indicated by numbered callout,

include

1. Wires from left phono jack


2. Wires from center phono jack


3. Wires from right phono jack


4. Wire from left potentiometer lug


5. Wire from center potentiometer lug

Black wire from battery pack to on/off switch

Black wire to on/off switch

Wires to speaker

Figure 7-13:
Wires
soldered to
the on/off
switch and
speaker.

Chapter 7: Murmuring Merlin 155