untitled

5. Insert two 0.0047 microfarad capacitors (C1 and C2), two 247 ohm
   resistors (R3 and R5), one 1 kohm resistor (R1), and one 120 ohm
   resistor (R5) on the breadboard, as shown in Figure 12-9.
   We discuss in Chapter 4 how to determine how short to clip the leads of
   many of these components to make them fit neatly on the breadboard.
   Make sure you wear your safety glasses when clipping leads!

L1 TB

to Pin 3 of IC 1

R2 TB

to Pin 4 of IC 1

L1 TB

to Pin 7 of IC 1

Pin 6 of IC 1

to open region

LED TB

to collector pin of Q1

Figure 12-8:

Hook up the

ICs, terminal

blocks (TB),

and discrete

components.

290 Part IV: Good Vibrations