Repeat after us: Heed all the safety precautions about soldering that we
give you in Chapter 2. Use adequate ventilation when soldering to avoid
inhaling fumes, and be sure to get a soldering iron with a stable stand so
there’s no danger of it falling off your work surface.- Secure the breadboard and battery pack in the box with Velcro, as
shown in Figure 13-17.
As you place the breadboard in the box, carefully feed the antenna wire out
of the box through its hole and secure the antenna wire with a wire clip. - Attach the wires from the battery pack, on/off, transmit, speed,
horn, and start/stop switches to the terminal blocks, as shown in
Figure 13-17.
Figure 13-16:
Wires
soldered to
the speed,
horn, and
start/stop
switches.320 Part IV: Good Vibrations