untitled

3. Insert wires to connect each component and terminal to the +V bus
   and insert a wire between the two +V buses to connect them, as
   shown in Figure 14-6.
   In this figure, four wires have been added:
   
   
   • Three shorter wires connect components to +V bus (marked with a
     
     
     • on this breadboard).
     
     
     
     
   
   
   • The long wire on the left connects the two +V buses.
   
   
   
   


4. Insert wires to connect the voice chip IC to the terminal blocks and to
   the open regions of the breadboard where discrete components will
   be inserted, as shown in Figure 14-7.

Figure 14-6:

Connect

components

to the

+V bus.

350 Part IV: Good Vibrations