TOYOTA PREVIA 91-97 REPAIR MANUAL

3-44 ENGINE AND ENGINE CJVERHAUL

Fig. 155 Place the intake camshaft at 75-100°BTDC of the

camshaft angle on the head

Intake %

Fig. 156 Camshaft bearing cap bolts tightening sequence; Intake

and exhaust are the same

Fig. 157 Set the knock pin of the intake camshaft at 5-30°|:|TDC
of the camshaft angle

Align (Timing Mark)

Fig. 158 Engage the exhaust and intake camshafts by matching

the timing marks to each gear

Fig. 159 Install and uniformly tighten the 10 bearing cap bolts in

several passes in this sequence

Adhesive

Fig. 160 Apply adhesive to the No. 6 bearing cap