TOYOTA PREVIA 91-97 REPAIR MANUAL

CHASSIS ELECTRICAL 6-33

Fig. 93 Slide the tail light unit out towards the rear of the vehi-
cle

To install:

6. Insert new bulb into the sockets.


7. Position and secure the socket to the back of the assembly.


8. Place the lamp into position and pushing towards the front of the
   vehicle, secure the clamps.


9. Install and tighten the retaining screws.

Dome Light

REMOVAL & INSTALLATION

I See Figures 96, 97 and 98

1. Using a small prytool, carefully remove the cover lens from the lamp
   assembly.


2. Remove the bulb from its retaining clip contacts. If the bulb has
   tapered ends, gently depress the spring clip/metal contact and disengage
   the light bulb, then pull it free of the two metal contacts.
   To install:


3. Before installing the light bulb into the metal contacts, ensure that all
   electrical conducting surfaces are free of corrosion or dirt.

Fig. 94 Twist and remove the socket from the back of the lamp Fig. 96 Carefully pry the lens off the dome lamp

Fig. 95 Twist and pull out the bulb from the socket

Fig. 97 There are 3 tabs on the lens, be careful not to damage

them