TOYOTA PREVIA 91-97 REPAIR MANUAL

6-38 CHASSIS ELECTRICAL

Medium Current Fuse and High Current |:use

Equal Amperage Rating

Fig. 114 The box type fuses are medium and high current fises

• '''

Fig. 116 Note each fuse link is labeled on the outside of the box

Fig. 115 It is advisable to use a special puller to remove th

fuses

Fusible Links

REPLACEMENT

I See Figures 116 and 117

In case of an overload in the circuits from the battery, the fusible I nks

are designed to melt before damage to the engine wiring harness oc< urs.

Headlight and other electrical component failure usually requires che ;king

the fusible links for melting. Fusible links are located in the engine c >m-

partment next to the battery.

The fusible link is replaced in a similar manner as the regular fus$, but a

removal tool is not required.

## CAUTION

Never install a wire in place of a fusible link. Extensive damage
and fire may occur.

Fig. 117 Simply pop the lid, then pull up to extract the fuse

Circuit Breakers

In the event the rear window defogger, environmental control system,

power windows, power door locks, power tail gate lock, sunroof or auto-

matic shoulder belt does not work, check its circuit breaker. Circuit

breakers are'located in the passenger's or driver's side kick panel with the

fuses.

REPLACEMENT

1. Turn the ignition switch to the OFF position.


2. Disconnect the negative battery cable. Wait at least 90 seconds
   before working on models with SRS system.


3. Remove the circuit breaker by unlocking its stopper and pulling it
   from its socket.
   To install:


4. Carefully snap the breaker into place and be sure to
   secure.