TOYOTA PREVIA 91-97 REPAIR MANUAL

10-26 BODY AND TRIM

Fig. 85 ... then peel the pedestal off of the adhesive disc...

Fig. 86... and peel the adhesive disc off of the windshield

Fig. 87 The chip will still be slightly visible, but it should be

filled with the hardened solution

Inside Rear View Mirror

REPLACEMENT

The inside mirror is held to its bracket by screws. Usually these are cov-

ered by a colored plastic housing which must be removed for access. These

covers can be stubborn; take care not to gouge the plastic during removal.

Once exposed, the screws are easily removed. The mirror mounts are

designed to break away under impact, thus protecting your head and face

from serious injury in an accident.

Reassembly requires only common sense (which means you can do it

wrong—pay attention); make sure everything fits without being forced and

don't overtighten any screws or bolts.

REMOVAL & INSTALLATION

I See Figures 88, 89, 90, 91 and 92

The seat in the Previa van are all removed basically in the same manner.

Some seats may have wiring near by that may need to be placed to the side

to access the bolts.

1. Locate the seat track retaining bolts. A cover may be hiding them.


2. Remove the bolt covers.


3. Remove the seat track retaining bolts and extract the unit from the
   vehicle.
   To install:


4. Position the seat with track onto the floorpan and secure with the
   retaining bolts.