- Disassemble left transversal lever assembly.
(a) Disassemble cotter pin and screw cap.
(b) Use special tool to disassemble terminal assembly from
steering knuckle. - Disassemble left lower control arm assembly
[64000091]
Disassemble the bolt and two nuts, then disassemble lower
control arm from lower ball joint.- Disassemble wheel hub assembly of left front wheel.
Use plastic hammer to disassemble drive shaft from wheel hub.
Note: forbid damaging dust-proof cover and the rotator of
speed sensor. - Disassemble left front drive shaft assembly
[64000082]
(a) Disassemble the seal board of left front fender.
(b) Use special tool to disassemble front drive shaft assembly.
Note: do not damage oil seal. - Fix left front shaft hub assembly.
Note: if supporting automobile weight only with bearing,
shaft hub bearing will be damaged; for example, when
moving automobile in process of disassembling drive
shaft. So, if it is not necessary to support automobile
weight with shaft hub bearing, it is necessary to use
special tool to support. - Disassemble No.2 fixing clamp of inner joint dust-
proof cover of left front drive shaft.
(a) Single-contact fixing clamp type:
Use screw driver to disassemble No.2 fixing clamp of inner
joint dust-proof cover of left front drive shaft.Drive shaft--Front drive shaftspecial toolspecial tool114