Drive shaft--Front drive shaft
Left and right driving shaft Capacity of lubricating grease
B type 125-135 grams
C type 190-200 grams
- Disassemble clasp of inner joint of left front drive
shaft.
Use screw driver to disassemble the clasp.
- Disassemble dustproof cover of left front drive
shaft.
Use special tool and press to disassemble dustproof cover.
- Assemble dustproof cover of left front driveshaft.
Liking that shown in figure, use special tool and press to as-
semble left dustproof cover
Note: Dustproof cover should be assembled to its position
completely.
Do not damage dustproof cover lid.
- Assemble the clasp of inner joint of left front drive
shaft.
Assemble new clasp.
- Assemble exterior joint dustproof cover (B type and
C type).
(a) Twist ethylene adhesive tape on gear slot of exterior joint to
prevent damage.
(b) Assemble following parts on drive shaft by sequence.
(1) No.2 fixing clamp of exterior joint dustproof cover.
(2) Exterior joint dustproof cover
(3) Fixing clamp of exterior joint dustproof cover.
(c) Fill lubricating grease in exterior joint assembly.
(d) Assemble exterior joint dustproof cover on exterior joint shaft.
- Assemble No.2 fixing clamp of exterior joint
dustproof cover of left front drive shaft.
(a) AUMIGA fixing type.
Tighten big fixing clamp of exterior joint.
Special tool
Special tool
117
