Drive shaft--Front drive shaft
(b) B type
Liking that shown above, set up the distance of absorber:
- Assemble fixing clamp of dynamic absorber of drive
shaft.
(a) Single-contact fixing clamp type:
Assemble new fixing absorber clamp on the absorber of drive
shaft, then fix the fixing clamp with screw driver.
(b) Mesh clasp type:
Assemble new fixing absorber clamp on the absorber of drive
shaft, then fix the fixing clamp with screw driver.
- Assemble inner joint of left front drive shaft.
(a) Twist ethylene adhesive tape on gear slot of exterior joint to
prevent damage.
(b) Assemble following parts on drive shaft by sequence.
(1) No.2 fixing clamp of inner joint dustproof cover.
(2) Inner joint dustproof cover
(3) Fixing clamp of inner joint dustproof cover.
(c) Align the mark made before disassembly, and assemble
triangle joint in drive shaft.
(d) Assemble triangle joint assembly with copper stick and
hammer.
Note: do not knock the stator.
Single-contact fixing
clamp type
Mesh clamp type
Align the
mark
119
B type and C typ 470 ± 2mm
