目录.p65

Brake--Hydraulic pressure control unit

7. Assemble hydraulic control unit and bracket.
   (a) Assemble hydraulic control unit and bracket with screw cap
   and two bolts.
   Torque: 19 N⋅⋅⋅⋅⋅m

(b) Liking that shown in figure, use special tool to assemble

brake oil pipe on correct position of hydraulic control unit.

Torque: 15 ±±±±± 2 N⋅⋅⋅⋅⋅m

(c) Connect the joint of hydraulic control unit.

(d) Assemble bolt and connect the joint.

8. Assemble gasket of right front wing.


9. Assemble right front wheel.


10. Add brake liquid in storage tank.


11. Discharge the air in main pump.


12. Discharge the air in brake pipeline.


13. Check the liquid level of brake liquid.


14. Check whether brake liquid leaks.


15. Use handle tester to check the hydraulic control
    unit.

150

Connect the front

of main cylinder Connect the back

of main cylinder

Connect 2#

brake pipe

Connect the front left

Connect 2#

brake pipe

Connect the front right