目录.p65

Parking brake

Parking brake system

Malfunction phenomenon table.....................

Use following table to find the reason of malfunction, the number in table indicates the preferred se-

quence of possible reason. Please check each part by sequence, if necessary, change this part.

Parking brake--Parking brake system

Adjustment.....................................................

1. Disassemble rear wheels


2. Adjust the clearance of parking brake shoe


3. Assemble rear wheels
   Torque: 103 ±±±±± 10 N⋅⋅⋅⋅⋅m


4. Check the travel of parking brake handle.
   Pull up the parking brake handle and calculate the sound num-
   ber of handle.
   When parking brake handle locates 196N: 6-9 sounds.


5. Adjust the travel of parking brake handle
   (a) Disassemble upper trim board of central box.
   (b) Disassemble central box.
   (c) Release locking screw cap, then rotate adjusting screw cap
   until handle travel accords with the specification.
   (d) Tighten locking screw cap.
   Torque: 5.0 N⋅⋅⋅⋅⋅m
   (e) Assemble central box.
   (f) Assemble trim board on central box.

Malfunction phenomenon Possible malfunction part Reference page

1. Travel of parking brake handle (adjusted badly). 154


2. Pull cable of parking brake (attached). 156, 158
   Brake lag 3. Clearance of parking brake shoe (adjusted badly). 161


3. Friction plate of parking brake shoe (damaged or distorted). 161


4. Tension or return spring (damaged). 161

Lock the screw cap

Adjust the

screw cap

154