目录.p65

Spread seal fastening glue on the bolts, and connect trans-

position swing lever and transposition swing lever shaft with

transposition cover with bolts, bolt torque is 16N•m

Assemble A gasket, spring, interlocking bracket and shift swing

lever on shift reverse shaft by the sequence in figure, then

press elastic cylindrical pin in the hole of shift swing lever, at

the same time, the distance from its end surface to hole should

be 0-0.5mm after pressing it in.

Press in a new clamp spring liking that shown in figure.

Take out oil with the method in figure, and assemble a new oil

seal in transmission shell body.

Transmission—Disassemble assembly

 188