Power steering--Power steering oil pump assemblyPower steering oil pump assembly..................
Overhaul........................................................
- Disassemble front wheel
- Disassemble right bottom defender board [68000004]
- Disassemble driving belt.
- Disassemble oil storage tank to the No. 1 oil pipe
of power steering pump
Disassemble fixed clamp, and take down the oil storage tank
to the No. 1 oil pipe of power steering pump.- Disassemble in-out oil pipe assembly of power
steering gear [64000131]
(a) Use special tool to disassemble in-out oil pipe assembly.
(b) Disassemble the bolts and disconnect the fixed clamp of
in-out oil pipe.- Disassemble rear bracket of power steering pump
Disassemble the bolt and rear bracket of power steering pump.
- Disassemble power steering oil pump assembly
[64000132]
(a) Disconnect the joint of oil pressure switch.
(b) Disassemble two bolts, two screw caps, then take down
the power steering oil pump assembly. - Assembly power steering oil pump assembly
(a) Assemble power steering oil pump assembly with two
bolts and two screw caps.
Torque: 37 Nxxxxxm
(b) Connect the joint of oil pressure switch.
Note: the joint could not contact any oil.- Assemble the rear bracket of power steering oil pump assembly
Assemble rear bracket of power steering oil pump assembly with bolts.
Torque: 37 Nxxxxxm
Hint: Insure the stop lever of bracket has contacted the body of power steering pump, then
tighten the bolt. 203 Special tool