- Assemble control cable of air mixing flow choke
(manual air conditioner).
(a) Connect control cable of air mixing flow choke to air condi-
tioner control assembly.
(b) Set up drag arm at “MAX>COOL” position.
(c) Assemble inner pull cable terminal to control lever.
(d) Press down lightly the fixed clamp of pull cable by the ar-
row direction in left figure, then assemble exterior pull cable
to fixed clamp.
Air conditioner--Air conditioner central heating core assembly
Connection Clearance Wrong
233
Hint: Operate temperature control lever, check whether the control lever keep silent and does
not return at the position of “MAX.COOL” and “MAX.HOT”.
(e) Disassemble control cable of air mixing flow choke from air conditioner control assembly.
- Assemble upper panel assembly.
- Assemble air conditioner control assembly.
- Assemble helix cable.
- Assemble steering wheel.
- Check whether the steering wheel position is right.
- Check horn button assembly.
- Assemble horn button assembly.
- Check SRS warning light.
- Assemble refrigerant No.1 low pressure hose.
(a) Spread Refrigerant oil on new O-shape loop and assemble
it on hose.
(b) Assemble refrigerant No.1 low pressure hose and fixed
clamp.
Hint: After installation, check the fixed situation of
pipeline fixed clamp claw.
- Assemble refrigerant liquid pipe A.
(a) Spread Refrigerant oil on new O-shape loop and assemble it on hose.
(b) Assemble refrigerant liquid pipe A and fixed clamp.
Hint: After installation, check the fixed situation of pipeline fixed clamp claw.
- Add cooling water.
- Heat the engine.
- Check whether the cooling water leaks.
- Fill the refrigerant, regulated quantity: 660 ± 10g.
- Check whether the refrigerant leaks.
