目录.p65

Fuel - Fuel pump assembly

Fuel pump assembly...........................................

Removing, installing and disassembling, assembling....

1. Take measures to prevent gasoline leaking


2. Remove rear seat cushion assembly


3. Remove rear floor repairing hole cover


4. Remove No. 2 fuel evaporation assembly
   Notes:
   z Check there is contaminant looked like dirt around the joint before operating and clean it off in the
   case of contaminant.
   z Be careful of the contaminant looked like dirt, because fast-joint depends on o-ring to seal fuel pipe
   and joint.
   z Do not perform this operation with tools.
   z Do not bend or distort nylon hose.
   z Cover the joint with plastic bag after removing the fuel hose.
   z When the joint is stuck with fuel pipe, clip the hose with fingers and rotate carefully to release the
   hose, and then remove it.


5. Remove fuel tank main fuel hose and oil return pipe assembly
   Notes:
   z Check there is contaminant looked like dirt around the joint before operating and clean it off in the
   case of contaminant.
   z Be careful of the contaminant looked like dirt, because fast-joint depends on o-ring to seal fuel pipe
   and joint.
   z Do not perform this operation with tools.
   z Do not bend or distort nylon hose.
   z Cover the joint with plastic bag after removing the fuel hose.
   z When the joint is stuck with fuel pipe, clip the hose with fingers and rotate carefully to release the
   hose, and then remove it.


6. Remove fuel pump assembly
   (a) Screw off fuel pump tighten nut (plastic fuel tank) or remove
   6 screws (iron fuel tank).
   (b) Pull out fuel pump assembly.
   Notes:
   z Do not damage fuel pump filter screen.
   z Be careful not to bend the measuring oil arm of fuel gauge
   float unit.


7. Install fuel pump assembly
   Torque: 8 N.m


8. Install rear floor repairing hole cover
   Install rear floor repairing hole cover with butyl rubber cloth.


9. Check there is fuel leakage.

20