Clamping Splined Miters
H
ERE’S AN IMPROVED CLAMPINGblock for spline-miter joints. My
set has been used to make at least a hundred joints.
The glue block is basically an L-profile block with two additions—
a channel cut in the inside corner to allow for exuded glue and a
series of inspection slots cut into the outside corner of the block to
see if the joint is pulled together evenly. The blocks can be used with
strap or bar clamps.
—R. H. NORTON,Shalimar, Fla.
CHAPTER NINE
Slot for glue
Inspection
notches