2015_Hardware01_Layout 1

Page H-47 Call Toll Free: 1-800-822-3450 - ©2016 Copyright B & P Lamp Supply, Inc.

22885 - Steel Universal Circle Crossbar,

113 ⁄ 16 " center hole - 4" O.D. , 2^1 ⁄ 8 " C to C,

23 ⁄ 4 " C to C, 3^1 ⁄ 2 " C to C. With ground

screw. Steel is .056" thick

22910 - 4^5 ⁄ 8 " Offset Crossbar, slips over^5 ⁄ 8 "

dia. stud. 8/32 tapped holes are 4^1 ⁄ 4 " C. to C.,

no ground hole. Steel is .060 thick

22911 - 4" crossbar tapped 1/8F w/ 8/32F

Gnd. Hole. Slot size^3 ⁄ 16 " X 3^5 ⁄ 8 ", 16 gauge

steel, .063" thick. No ground screw

22918 - 4" Crossbar tapped 1/8F, with 8/32

Ground Screw. Slot size^3 ⁄ 16 " X 3^5 ⁄ 8 ", 16

gauge steel, .058" thick.

22919 - 3^15 ⁄ 16 " formed crossbar, 2^3 ⁄ 16 " to

39 ⁄ 16 " C. To C. dimension.^11 ⁄ 16 " center hole

slip, has 8/32 ground screw. 16 gauge steel,

.065" thick.

22887 - E-Z Adjustable Steel Crossbar, slip 3/8 IP, adjusts 4^1 ⁄ 2 "

to 6^1 ⁄ 2 ". Steel is .060" thick

22882 - All purpose

crossbar adjusts from

37 ⁄ 8 " to 5", slips 3/8 IP.

Has 45 lbs. load rating.

Steel is .053" thick

Cross Bars

22704 - Steel

Ground Screw,

8/32M - green

color

22900 - Tapped bracket bar, 3^7 ⁄ 8 " long,

1/4IP tap center hole, ground screw in-

serted. Steel is .078" thick.

22901 - Tapped bracket bar, 3^7 ⁄ 8 " long,

1/8IP tap center hole, ground screw

inserted. Steel is .058" thick.

22923 - 4^3 ⁄ 16 " long cross bar, tap 3/8IP, 8/32

ground hole (no screw inserted). Steel is

.075 thick

22926 - 4^1 ⁄ 2 " long offset crossbar, slips

3/8IP pipe, inside screw hole 2^3 ⁄ 4 " C to C,

outside screw holes 3^1 ⁄ 2 " C to C, with 8-32

ground screw. Steel is .055" thick.

22924 - 4 3/16" long, 1" wide 11 gauge

heavy duty cross bar, tap 1/4IP, 8/32 ground

hole with screw inserted. Steel is .122" thick.

22925 - Pin-up bracket, zinc

plated steel, 1^5 ⁄ 8 " long X

(^5) ⁄ 8 " wide X (^1) ⁄ 2 " offset, for
pin-up lamps. Steel is
.040" thick
22927 - 4" universal cross bar,
slips 3/8IP, inside screw holes
23 ⁄ 4 " C to C, outside screw holes
39 ⁄ 16 " C to C, tapped 8/32, 8/32
ground hole (no screw inserted).
16 gauge steel, .065" thick.
22922 - 4^1 ⁄ 8 "Crossbar tapped 1/4F and with
8/32 Ground Screw. 14 gauge steel, .075 thick.
22884 - Combo Swivel,
Gem Bar & Standard
Cross Bar - 3^13 ⁄ 16 "
formed crossbar
(top) is 2^3 ⁄ 4 ", 3^3 ⁄ 8 ", and
31 ⁄ 2 " C to C 3^7 ⁄ 8 " gem bar has
8/32 ground screw, does not slip
1/8 IP. Steel is .058" thick.
(UL standard 1598 states that a crossbar used for luminaire shall be at least .053 inches thick if made of steel)