90 Making doors and doorframes
Construction details
Figure 5.13(e): Note that although the made- up panel
obviously must be fitted into position at the assembly
of the door and gluing- up stage, because the sill and
head of the aperture linings are best run through on
each side, with the side- linings scribed onto them,
they should be fitted and glued in after the door has
been assembled.
Figure 5.13 (d) Section C- C through the 95 × 45mm par finished stile, showing similar detailed features to those
described in Section B- B.
HEADL/H
LININGR/H
LININGSILLFigure 5.13 (e) Isometric views of four of the scribed
ends of the aperture- lining. Note that a template (similar
to that shown at Figure 5.9(f) above) could be made for
these.