Simulink Control Design™ - MathWorks

Batch Compute Steady-State Operating Points for

Multiple Specifications

This example shows how to find operating points for multiple operating point

specifications using the findop command. You can batch linearize the model using the

operating points and study the change in model behavior.

Each time you call findop, the software compiles the Simulink model. To find operating

points for multiple specifications, you can give findop an array of operating point

specifications, instead of repeatedly calling findop within a for loop. The software uses a

single model compilation to compute the multiple operating points, which is efficient,

especially for models that are expensive to recompile repeatedly.

Open the Simulink model.

sys = 'scdspeed';

open_system(sys)

Create an array of default operating point specification objects.

opspec = operspec(sys,3);

To find steady-state operating points at which the output of the rad/s to rpm block is fixed,

add a known output specification to each operating point specification object.

opspec = addoutputspec(opspec,[sys '/rad//s to rpm'],1);

for i = 1:3

Batch Compute Steady-State Operating Points for Multiple Specifications