(^3) To add additional analysis points from within the same bus signal, repeat step 2.
To remove an analysis point, select the signal in the Linearization Inputs/Outputs
section, and click Remove.
Once you have defined all of the required analysis points for that bus, click OK.
(^4) To specify analysis points for another bus signal, repeat steps 2 and 3.
(^5) To view linear analysis point indicators in the Simulink model, in the model window,
select Display > Signals & Ports > Linearization Indicators.
The software adds graphical annotations to the bus signals indicating the type of
analysis points specified. For example, if you specify a linearization input in the
COUNTERBUS signal and a linearization output in the OUTPUTBUS signal, the software
adds the corresponding annotations to the signals.
Specify Portion of Model to Linearize in Simulink Model
tuis.
(Tuis.)
#1