Simulink Control Design™ - MathWorks

The expression params(1).Value>0.5 & params(2).Value<5 returns a logical

array. find returns the linear index of every true entry in the logical array

Output Arguments

linsys — Transfer function for specified I/Os

state-space model

Transfer function for specified I/Os, returned as described in the following:

• If you did not configure s.Parameters and s.OperatingPoints, the software
  calculates linsys using the default model parameter values. The software uses the
  model initial conditions as the linearization operating point. linsys is returned as a
  state-space model.


• If you configured s.Parameters only, the software computes a linearization for each
  parameter grid point. linsys is returned as a state-space model array of the same
  size as the parameter grid.


• If you configured s.OperatingPoints only, the software computes a linearization for
  each specified operating point. linsys is returned as a state-space model array of the
  same size as s.OperatingPoints.


• If you configured s.Parameters and specified s.OperatingPoints as a single
  operating point, the software computes a linearization for each parameter grid point.
  The software uses the specified operating point as the linearization operating point.
  linsys is returned as a state-space model array of the same size as the parameter
  grid.


• If you configured s.Parameters and specified s.OperatingPoints as multiple
  operating point objects, the software computes a linearization for each parameter grid
  point. The software requires that s.OperatingPoints is the same size as the
  parameter grid specified by s.Parameters. The software computes each linearization
  using corresponding operating points and parameter grid points. linsys is returned
  as a state-space model array of the same size as the parameter grid.


• If you configured s.Parameters and specified s.OperatingPoints as multiple
  simulation snapshot times, the software simulates and linearizes the model for each
  snapshot time and parameter grid point combination. Suppose that you specify a
  parameter grid of size p and N snapshot times. linsys is returned as a state-space
  model array of size N-by-p.

15 Alphabetical List