Simulink Control Design™ - MathWorks

Tips

• Clearing this parameter disables the gain-phase bound and the software stops
  checking that the gain and phase satisfy the bound during simulation. The bound
  segments are also greyed out on the plot.


• To only view the bound on the plot, clear Enable assertion.

Command-Line Information

Parameter: EnableGainPhaseBound

Type: character vector

Value: 'on' | 'off'

Default: 'off'

Open-loop phases (deg)

Open-loop phases, in degrees.

Specify the corresponding open-loop gains in Open-loop gains (dB) on page 16-209.

Settings

Default: []

Must be specified as start and end phases:

16 Blocks — Alphabetical List