Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Enable assertion
Enable the block to check that bounds specified and included for assertion in the Bounds
tab are satisfied during simulation. Assertion fails if a bound is not satisfied. A warning,
reporting the assertion failure, appears at the MATLAB prompt.
If assertion fails, you can optionally specify that the block:
- Execute a MATLAB expression, specified in Simulation callback when assertion
fails (optional) on page 16-216. - Stop the simulation and bring that block into focus, by selecting Stop simulation
when assertion fails on page 16-217.
For the Linear Analysis Plots blocks, this parameter has no effect because no bounds are
included by default. If you want to use the Linear Analysis Plots blocks for assertion,
specify and include bounds in the Bounds tab.
Clearing this parameter disables assertion; that is, the block no longer checks that
specified bounds are satisfied. The block icon also updates to indicate that assertion is
disabled.
In the Simulink model, in the Configuration Parameters dialog box, the Model
Verification block enabling parameter lets you enable or disable all model verification
blocks in a model, regardless of the setting of this option in the block.
Nichols Plot