Simulink Control Design™ - MathWorks

Off

Open the Block Parameters dialog box when you double-click the block.

Command-Line Information

Parameter: LaunchViewOnOpen

Type: character vector

Value: 'on' | 'off'

Default: 'off'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Show Plot

Open the plot window.

Use the plot to view:

• System characteristics and signals computed during simulation

You must click this button before you simulate the model to view the system

characteristics or signal.

You can display additional characteristics, such as the peak response time, by right-

clicking the plot and selecting Characteristics.

• Bounds

You can specify bounds in the Bounds tab of the Block Parameters dialog box or right-

click the plot and select Bounds > New Bound. For more information on the types of

bounds you can specify, see the individual reference pages.

You can modify bounds by dragging the bound segment or by right-clicking the plot

and selecting Bounds > Edit Bound. Before you simulate the model, click Update

Block to update the bound value in the block parameters.

Typical tasks that you perform in the plot window include:

16 Blocks — Alphabetical List