If Automatically update block is selected, the Frequency Response Based PID
Tuner writes the new PID gains to the PID Controller block when tuning is completed.
Otherwise, click Update PID Block to write the tuned gains to the block. Simulate the
model to validate the tuned gains against your full nonlinear system.
For an example illustrating the use of the Frequency Response Based PID Tuner to
tune a PID Controller block in a Simulink model that does not linearize, see “Design PID
Controller Using Plant Frequency Response Near Bandwidth” on page 7-58.
See Also
More About
- “Introduction to Model-Based PID Tuning in Simulink” on page 7-3
- “Design PID Controller Using Plant Frequency Response Near Bandwidth” on page
7-58 - “Design PID Controller Using Estimated Frequency Response” on page 7-159
See Also