AWS EDITION 1, 2009

474

Appendix B

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

(Appendix B is not part of the AWS for compliance purposes)

4 - Sheet Products

PRE-MANUFACTURED SETS - SELECTIVELY REDUCED IN WIDTH

NOTE: Some loss of continuity at every panel joint,

40

40 36 36 36 36 12

40

40

40

40

No

Match

No

Match

Panel Widths

corners or at flitch change

These are panels just like those in the previous illustration, usually made and warehoused in 4’ x 8’ or 4’ x 10’ sheets in sequenced

sets. They are often selected for continuity, recut into modular widths, and numbered to achieve the appearance of greater symmetry.

If more than one set is required, matching between the sets cannot be expected. Similarly, doors or components often cannot be

fabricated from the same flitch materials, resulting in noticeable mismatch.

FLOOR PLAN KEY

Cabinet

Window

10’ -0” (3048 mm)

10’ -0” (3048 mm)

13’ -0” (3962 mm)

Door

SE-

B