AWS EDITION 1, 2009

545

Appendix B

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

(Appendix B is not part of the AWS for compliance purposes)

8 - Wall Surfacing

3 - Sequence Matched Uniform Size Set

Panels manufactured at 26 inches wide,

for the job in sequenced and numbered set(s)

Panels at corner of 10’ wall cut to 16" with

resulting loss of grain pattern.

One of the possible panel layouts;

D oor may be specified under

Section 8 - Wall Surfacing or

under Section 9 - Doors

1

2

3

4

5 6 7 8 9 10 11 12 13

14

15

16

No

match

with the

flush or

stile and

rail door

FLOOR PLAN KEY

Cabinet

Window

10’ -0” (3048 mm)

10’ -0” (3048 mm)

13’ -0” (3962 mm)

Door

These sets are manufactured for a specific installation to a uniform panel width and height. If more than one flitch is required to
produce the required number of panels, similar flitches will be used. This type of panel matching is best used when panel layout
is uninterrupted, and when the design permits the use of equal-width panels. Some sequence will be lost if trimming is required to
meet field conditions. Doors and components within the wall cannot usually be matched to the panels. Moderate in cost, sequenced
uniform panels offer a good compromise between price and aesthetics.

B