Part I: SolidWorks Basics
FIGURE 2.41
Adding tabs to the CommandManager
- In the Customize dialog box, select the Large Icons option.
- Turn the Sketch toolbar on, but not inside the CommandManager; use the
Toolbars tab of the Customize dialog box. Dock the Sketch toolbar to the right side
of the window.
- Select the Standard Views toolbar and drag it to the right end of the Command-
Manager. Now drag a couple of buttons off it, such as the bottom, or left, or back views.
- On the Commands tab of the Customize dialog box, select the Flyout toolbars
entry, and drag any Flyout toolbars from the Customize dialog box to the Menu Bar
toolbar. Figure 2.42 shows this step in action.
FIGURE 2.42
Adding flyouts to the Menu Bar toolbar
- With the Commands tab of the Customize dialog box still active, click on the View
Category.
- Add or remove tools until this toolbar has the tools you want to use on it. If you
want to deselect the Heads-UP View toolbar, activate the Toolbars tab in
Customize, and de-select the View (Heads-Up) option.
