4) Testing time constraints: 50% load 2 hours, 100% load 6 hours.5) Fuel required for the onsite test shall be furnished by UIHC.6) Test shall be witnessed by a representative of UIHC.c. General to both Factory and On-Site Testing1) The following engine parameters shall be read and recorded at 15-minute intervals
throughout the test:a) Engine oil pressure.b) Engine oil temperature.c) Engine exhaust temperature at exhaust manifold.d) Jacket water temperature in and out.e) Engine rpm – maintain a constant 1200 rpm or 1800 rpm.f) Fuel pressure.g) Fuel consumption – gallons per hour.h) Ambient air temperature.2) The following checks shall be included:a) Functioning of the high temperature coolant circuit safety device by restricting
cooling system capability.b) Overspeed Shutdown Device. Record speed at which overspeed trip operates;
must be set to operate at no more than 10% overspeed condition.- Diesel Engine Generator Set Capacity
The ratings of the engine generator set shall be not less than the following:
a. Engine:1) Speed.................................................................... 1200 rpm or 1800 rpm.2) Type ..................................................................... 2 stroke or 4 stroke.3) Fuel ...................................................................... #2 Diesel.12
November 1, 2016