RX8--Transmission (Manual & Auto)

• Inspect the VSS.

(See VEHICLE SPEED SENSOR (VSS)

INSPECTION .)

• Is the VSS normal?

No

Replace the VSS, then go to the next step.

(See VEHICLE SPEED SENSOR (VSS)

REMOVAL/INSTALLATION .)

Yes

Replace the TCM, then go to the next step.

(See TCM REMOVAL/INSTALLATION .)

10

VERIFY TROUBLESHOOTING OF DTC P0720

COMPLETED

• Make sure to reconnect all disconnected
  connectors.


• Clear the DTC from the TCM memory using
  the WDS or equivalent.


• Drive the vehicle with vehicle speed of 5
  km/h {3 mph} or less and turbine speed of
  2,000 rpm or more for 3.5 s or more


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

11

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTCs present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)