RX8--Transmission (Manual & Auto)

Yes

Replace the TCM, then go to the next step.

(See TCM REMOVAL/INSTALLATION .)

13

VERIFY TROUBLESHOOTING OF DTC P0743

COMPLETED

• Make sure to reconnect all disconnected
  connectors.


• Clear the DTC from the TCM memory
  using the WDS or equivalent.


• Drive the vehicle in D range and make sure
  that the gears shift smoothly from 1GR to
  4GR.


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

14

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTCs present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)