RX8--Transmission (Manual & Auto)

(WallPaper) #1

INSPECT PRESSURE CONTROL


SOLENOID VALVE CONNECTOR FOR


POOR CONNECTION



  • Disconnect the pressure control solenoid
    valve connector.

  • Inspect for poor connection (such as
    damaged/pulled-out pins, corrosion).

  • Are the connector and terminals normal?


No
Repair or replace the connector and/or terminal,
then go to Step 13.

Yes
Repair or replace the control valve body
connector harness, then go to Step 13.

8


INSPECT RESISTANCE OF PRESSURE


CONTROL SOLENOID VALVE



  • Inspect the resistance between pressure
    control solenoid valve (part-side)
    terminal A and body ground.

  • Is the resistance within 11.916.9
    ohms?


(See SOLENOID VALVE
INSPECTION .)

No

Verify the pressure control solenoid valve
installation.


  • If the pressure control solenoid valve is
    installed correctly, replace the pressure
    control solenoid valve, then go to Step 13.


(See SOLENOID VALVE
REMOVAL/INSTALLATION .)
Yes Go to the next step.

9


INSPECT TCM CONNECTOR FOR POOR


CONNECTION



  • Disconnect the TCM connector.

  • Inspect for poor connection (such as
    damaged/pulled-out pins, corrosion).

  • Are the connector and terminals normal?


No
Repair or replace the connector and/or terminal,
then go to Step 13.

Yes Go to the next step.

10


INSPECT AT SOLENOID VALVE


CONNECTOR CIRCUIT FOR OPEN


CIRCUIT



  • Inspect for continuity between the TCM
    (wiring harness-side) terminal 2X and
    AT solenoid valve connector (wiring
    harness-side) terminal K.

  • Is there continuity between the
    terminals?


No
Repair or replace the wiring harness, then go to
Step 13.

11 Yes Go to the next step.


(w) RX-8 Transmission (Manual & Auto)
Free download pdf