RX8--Transmission (Manual & Auto)

• Inspect for continuity between the ROOM
  15 A fuse terminal and TCM (wiring
  harness-side) terminal 1A.


• Is there continuity?

No

Repair or replace the wiring harness, then go to

the next step.

Yes

Replace the TCM, then go to the next step.

(See TCM REMOVAL/INSTALLATION .)

7

VERIFY TROUBLESHOOTING OF DTC

P0882 COMPLETED

• Make sure to reconnect all disconnected
  connectors.


• Turn the ignition switch to the ON
  position (engine off).


• Clear DTC from TCM memory using the
  WDS or equivalent.


• Start the engine and warm it up
  completely.


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

8

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTC present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)