RX8--Transmission (Manual & Auto)

13. Remove the TR switch.


14. Rotate the manual shaft to the extension housing side fully and return two notches to set the N position.


15. Install the TR switch and hand-tighten the mounting bolts.

CAUTION:

• Improper adjustment of the TR switch will cause abnormal operation of the automatic
  transmission. Be sure to use the SST to adjust the TR switch correctly.

16. Using the SST and by turning the TR switch, adjust the positions of the manual shaft and the TR switch
    neutral hole.


17. Tighten the TR switch mounting bolts.

Tightening torque

o 4.46.5 N·m

{4566 kgf·cm, 4057 in·lbf}

(w) RX-8 Transmission (Manual & Auto)